The Christman Company
2018
This complete renovation of an existing area involved intumescent painting, painting of exposed ceilings, and felt wallcoverings. One of the highlights is the rounded rooms with multiple colors of felt wallcovering floor to ceiling.
CSM Group
2018
This project was a complete renovation of an old foundry in Kalamazoo. The open office building included exposed ceilings, high-performance coatings, and mural wallcoverings.
Owen Ames Kimball
2018
This renovation and addition to Kelloggsville High School included a new and existing gymnasium, a new front lobby, and renovated classrooms. The electrostatic paint process was used on existing lockers and new stair panels. There are multiple painted murals and vinyl graphic murals on the project.
Miller-Davis Company
2021
This project involved the complete renovation of the existing facility. Part of our commercial painting scope included painted graphics in the gymnasium and fitness room.
Turner
2020
H & H wallcovering installers put their expert skills to use on this project. Installing multiple graphic wallcovering murals throughout the 1st floor of the clinical tower.
Clark
2019
This project was a challenging and also exciting job to be apart of. H & H performed commercial painting services with high articulating boom lifts, multi metallic colored Tnemec epoxies, and high visible ceiling coatings. Our Floor division came into prep and epoxy the mechanical room floors with anti-slip silica sand broadcast into the topcoat.
The Christman Company
2020
The scope of this project was painting a new middle school for Sparta Public Schools. Which included the layout and painting of a spartan head graphic, along with the installation of a spartan head wallcovering graphic.
Pearson Construction
2020
This project involved the commercial painting of a new athletic complex for the football stadium at Berrien Springs Schools. The project included locker rooms, concession areas, and a press box. Part of our scope of work was painted graphics on masonry walls which were challenging due to some of the small letters that were part of the graphic.
Musashi Automotive
2021
Musashi is an existing automotive manufacturing facility. In the assembly area in the back of the plant the floor had a 3/8” trowel down coating with Epoxy topcoats. H & H Painting removed the existing trowel down coating using PCD’s on a large grinder. Once all of the trowel down epoxy coating had been removed we then diamond ground, polished, and densified the concrete to an 800 grit level.
Miller-Davis
2021
Before we painted the concrete ceiling in this new Natatorium we vapor blasted the concrete surface. This allowed the right surface profile to accept a strong epoxy primer and topcoat system.
Elite Companies
2021
Pure Releaf purchased an old manufacturing facility in Battle Creek, MI. The concrete floors were in rough shape and required extensive patching and repairs before coatings could be installed.
DeLoof Construction
2020
This project was an old break room with a VCT tile. All the tile was removed exposing some large holes and cracks in the concrete. These were patched with a combination of Epoxy patch materials and urethane cement. All patchwork was diamond ground to a smooth surface and a three-coat 100% solids epoxy coating with anti-slip was applied.
Greg Schenks Professional Painting
2020
This project was in an old factory that was being repurposed for a new business. The existing 34,000 sq. ft. had an old heavily worn urethane coating. This was removed by shot blasting, then the floor was diamond ground to a smooth surface. Lines were painted and then a concrete densifier was applied.
Alpha Boarding Center
2020
This dog boarding facility was about ten years old and had the original floors which were stained and clear coated over. The floors were dull, stretched and the old clear coat was damaged. We cleaned, sanded, and applied two coats of a clear polyurethane floor coating to bring the floors back to their original luster.
Sterling Heights Trove LLC
2020
A new construction project for a grow operation. We installed a highly abrasive resistant epoxy full broadcast coating with a Polyaspartic topcoat. A total 1/8 inch overall thickness coating system.
Schweitzer Construction
2020
This project was the JBS feet room. The room was being refurbed and new equipment installed. The floor was prepped using diamond grinding, shot blasting, and jackhammering. The floor required heavy repair with some holes being over six inches deep. Once all prep and repair had been done we installed a 3/8 Urethane cement coating with a full broadcast of colored quartz for traction being this floor is always wet during production.
DeLoof Construction
2020
This project was in an older section of the plant that they had removed the machinery out of the area in prep for a new line of equipment. The area had existing coatings, we used diamond grinding to remove all of the existing coatings. Once all of the old coatings were off the floor we patched and filled cracks. Then we applied a 100% solids Epoxy primer, a 100% solids Epoxy intermediate coat followed by a Polyaspartic top coat.
Schweitzer Construction
2020
This was a 100-year-old building being converted into a new restaurant. In the dining area, we Diamond ground the concrete to remove all the old adhesives from the existing floor coverings. We used a large diamond grinder and went over the floor with 30 grit, filled all cracks, and patched all damage on the floor. We then continued to grind using 80 grit and 150 git diamonds to smooth the floor. Once all patching, crack filling, and grinding was done we stained the floor using an acetone concrete stain. This followed by applying a low gloss clear sealer. In the kitchen and back of the house, we performed diamond grinding, patching, and crack filling followed by applying a two-coat urethane cement coating.
Miller Davis Company
2020
LMC art center was under renovation, rooms were in rough shape with old adhesives, lots of holes, and damage to the concrete floors. We diamond ground to remove all old adhesives, patched and repaired concrete substrate, and installed pigmented and clear epoxy floors.
The Christman Company
2020
This was an old garage area being converted into a storage room. The floor was old, cracked, and spalled. H&H prepped the surface by diamond grinding and patching the concrete. Then installed two coats of 100% solids Epoxy coating.
