DeLoof Construction
2020
This project was in an older section of the plant that they had removed the machinery out of the area in prep for a new line of equipment. The area had existing coatings, we used diamond grinding to remove all of the existing coatings. Once all of the old coatings were off the floor we patched and filled cracks. Then we applied a 100% solids Epoxy primer, a 100% solids Epoxy intermediate coat followed by a Polyaspartic top coat.
Greg Schenks Professional Painting
2020
This project was in an old factory that was being repurposed for a new business. The existing 34,000 sq. ft. had an old heavily worn urethane coating. This was removed by shot blasting, then the floor was diamond ground to a smooth surface. Lines were painted and then a concrete densifier was applied.
Elite Companies
2021
Pure Releaf purchased an old manufacturing facility in Battle Creek, MI. The concrete floors were in rough shape and required extensive patching and repairs before coatings could be installed.
Greg Schenks Professional Painting
2020
This project was in an old factory that was being repurposed for a new business. The existing 34,000 sq. ft. had an old heavily worn urethane coating. This was removed by shot blasting, then the floor was diamond ground to a smooth surface. Lines were painted and then a concrete densifier was applied.
Schweitzer Construction
2020
This project was the JBS feet room. The room was being refurbed and new equipment installed. The floor was prepped using diamond grinding, shot blasting, and jackhammering. The floor required heavy repair with some holes being over six inches deep. Once all prep and repair had been done we installed a 3/8 Urethane cement coating with a full broadcast of colored quartz for traction being this floor is always wet during production.
DeLoof Construction
2020
This project was in an older section of the plant that they had removed the machinery out of the area in prep for a new line of equipment. The area had existing coatings, we used diamond grinding to remove all of the existing coatings. Once all of the old coatings were off the floor we patched and filled cracks. Then we applied a 100% solids Epoxy primer, a 100% solids Epoxy intermediate coat followed by a Polyaspartic top coat.
Pioneer Construction
2015
The addition of an 8 1/2 acre roof deck to the parking structure at the Gerald R Ford International Airport. The work included sandblasting every weld on the entire structure and coating the welds with galvanized paint. All of the finished products needed to be tested by an independent agency to ensure the specified product mils were achieved. A detailed work plan was required to make sure schedules and testing requirements were met.
PARIC
2017
This project was a new facility for Midwest Energy’s Corporate Headquarters. Included in the new facility were a two-story office, warehouse, data center, truck bay storage, and a vehicle maintenance garage with a wash bay.
Throughout the project was various finishes from the general painting to vinyl and digital wallcovering to epoxy floor coatings. A major part of the project was applying an elastomeric coating system on the entire exterior tilt-up concrete walls.
